Integrated storage autopilot

13min
|
Vault

Vault 1.2 first introduced an internal storage backend, Integrated Storage as a technical preview, and the feature became generally available in Vault 1.4. Using the Integrated Storage, data gets replicated to all the nodes in the cluster using the raft consensus protocol. The management of the nodes in the cluster was a manual process.

Vault 1.7 introduced autopilot to simplify and automate the cluster management for Integrated Storage. The autopilot includes:

Cluster node health check
Server stabilization: prevent disruption to raft quorum due to an unstable new node
- Monitor newly added node health for a period and decide promotion to voter status
Dead server cleanup - periodic, automatic clean-up of failed servers

Vault enables Autopilot by default upon upgrading to Vault 1.7. Server stabilization works by default, but you must explicitly enable dead server cleanup. You will learn more about dead server cleanup the autopilot configuration section.

Prerequisites

This tutorial requires Vault, sudo access, and additional configuration to create the cluster.

Install Vault 1.7.0 or later

Scenario setup

To try the autopilot feature, you will use a terminal session and a shell script to start 6 Vault servers. Each server listens to a different port as shown in the diagram below.

Initialize and unseal vault_1 (http://127.0.0.1:8100). The root token creates a transit key that enables the other Vaults auto-unseal. This Vault server is not a part of the cluster.
Initialize and unseal vault_2 (http://127.0.0.1:8200). This Vault starts as the cluster leader. The script creates an example K/V-V2 secret.
Start vault_3 (http://127.0.0.1:8300). It automatically joins the cluster via retry_join.
Start vault_4 (http://127.0.0.1:8400). It automatically joins the cluster via retry_join.
Start vault_5 (http://127.0.0.1:8500). It automatically joins the cluster via retry_join.
Start vault_6 (http://127.0.0.1:8600). It automatically joins the cluster via retry_join.

Tip

If this is your first time setting up a Vault cluster with integrated storage, you're encouraged to complete the Vault HA Cluster with Integrated Storage tutorial first, and then return to this tutorial.

Retrieve the configuration by cloning the hashicorp-education/learn-vault-raft repository from GitHub.
```
$ git clone https://github.com/hashicorp-education/learn-vault-raft.git
```
Change the working directory to learn-vault-raft/raft-autopilot/local.
```
$ cd learn-vault-raft/raft-autopilot/local
```
Set the run-all.sh file to executable.
```
$ chmod +x run_all.sh
```

Execute the run_all.sh script to spin up a Vault cluster with 5 nodes.

$ ./run_all.sh[vault_1] Creating configuration  - creating /learn-vault-raft/raft-autopilot/local/config-vault_1.hcl[vault_2] Creating configuration  - creating /learn-vault-raft/raft-autopilot/local/config-vault_2.hcl  - creating /learn-vault-raft/raft-autopilot/local/raft-vault_2...snip...[vault_5] starting Vault server @ http://127.0.0.1:8500Using [vault_1] root token (s.5rjDMzU5Kj9bImUVaqPpihAo) to retrieve transit key for auto-unseal[vault_6] starting Vault server @ http://127.0.0.1:8600Using [vault_1] root token (s.5rjDMzU5Kj9bImUVaqPpihAo) to retrieve transit key for auto-unseal

You can find the server configuration files and the log files in the working directory.

Export the VAULT_ADDR environment variable to address the vault_2 server:
```
$ export VAULT_ADDR=http://127.0.0.1:8200
```

Verify the cluster.

$ vault operator raft list-peersNode       Address           State       Voter----       -------           -----       -----vault_2    127.0.0.1:8201    leader      truevault_3    127.0.0.1:8301    follower    truevault_4    127.0.0.1:8401    follower    truevault_5    127.0.0.1:8501    follower    truevault_6    127.0.0.1:8601    follower    true

The vault_2 is the leader.

Understand the autopilot behavior

Print the help message for the vault operator raft autopilot command.

$ vault operator raft autopilot -helpThis command is accessed by using one of the subcommands below.Subcommands:    get-config    Returns the configuration of the autopilot subsystem under integrated storage    set-config    Modify the configuration of the autopilot subsystem under integrated storage    state         Displays the state of the raft cluster under integrated storage as seen by autopilot

Display the current cluster autopilot state.

$ vault operator raft autopilot stateHealthy:                      trueFailure Tolerance:            2Leader:                       vault_2Voters:   vault_2   vault_3   vault_4   vault_5   vault_6Servers:   vault_2      Name:            vault_2      Address:         127.0.0.1:8201      Status:          leader      Node Status:     alive      Healthy:         true      Last Contact:    0s      Last Term:       3      Last Index:      118   vault_3      Name:            vault_3      Address:         127.0.0.1:8301      Status:          voter      Node Status:     alive      Healthy:         true      Last Contact:    1.73895338s      Last Term:       3      Last Index:      118   vault_4      Name:            vault_4      Address:         127.0.0.1:8401      Status:          voter      Node Status:     alive      Healthy:         true      Last Contact:    4.68575147s      Last Term:       3      Last Index:      118   vault_5      Name:            vault_5      Address:         127.0.0.1:8501      Status:          voter      Node Status:     alive      Healthy:         true      Last Contact:    2.630693989s      Last Term:       3      Last Index:      118   vault_6      Name:            vault_6      Address:         127.0.0.1:8601      Status:          voter      Node Status:     alive      Healthy:         true      Last Contact:    579.174724ms      Last Term:       3      Last Index:      118

Get the root token of vault_2.
```
$ cat root_token-vault_2
```

Use the root token to display the current cluster status.

$ curl --silent --header "X-Vault-Token: <root_token-vault_2>" \    http://127.0.0.1:8200/v1/sys/storage/raft/autopilot/state | jq .data

Note

This example uses jq to process the JSON output for readability.

Example output:

{  "failure_tolerance": 2,  "healthy": true,  "leader": "vault_2",  "optimistic_failure_tolerance": 2,  "servers": {    "vault_2": {      "id": "vault_2",      "name": "vault_2",      "address": "127.0.0.1:8201",      "node_status": "alive",      "last_contact": "0s",      "last_term": 3,      "last_index": 192,      "healthy": true,      "stable_since": "2023-08-29T12:14:46.282355-04:00",      "status": "leader",      "version": "1.14.1",      "upgrade_version": "1.14.1",      "node_type": "voter"    },    "vault_3": {      "id": "vault_3",      "name": "vault_3",      "address": "127.0.0.1:8301",      "node_status": "alive",      "last_contact": "3.737107421s",      "last_term": 3,      "last_index": 190,      "healthy": true,      "stable_since": "2023-08-29T12:15:08.284015-04:00",      "status": "voter",      "version": "1.14.1",      "upgrade_version": "1.14.1",      "node_type": "voter"    },    "vault_4": {      "id": "vault_4",      "name": "vault_4",      "address": "127.0.0.1:8401",      "node_status": "alive",      "last_contact": "1.750789762s",      "last_term": 3,      "last_index": 192,      "healthy": true,      "stable_since": "2023-08-29T12:15:10.283761-04:00",      "status": "voter",      "version": "1.14.1",      "upgrade_version": "1.14.1",      "node_type": "voter"    },    "vault_5": {      "id": "vault_5",      "name": "vault_5",      "address": "127.0.0.1:8501",      "node_status": "alive",      "last_contact": "4.703211676s",      "last_term": 3,      "last_index": 190,      "healthy": true,      "stable_since": "2023-08-29T12:15:12.284028-04:00",      "status": "voter",      "version": "1.14.1",      "upgrade_version": "1.14.1",      "node_type": "voter"    },    "vault_6": {      "id": "vault_6",      "name": "vault_6",      "address": "127.0.0.1:8601",      "node_status": "alive",      "last_contact": "2.66495459s",      "last_term": 3,      "last_index": 192,      "healthy": true,      "stable_since": "2023-08-29T12:15:14.284139-04:00",      "status": "voter",      "version": "1.14.1",      "upgrade_version": "1.14.1",      "node_type": "voter"    }  },  "upgrade_info": {    "status": "idle",    "target_version": "1.14.1",    "target_version_voters": [      "vault_2",      "vault_3",      "vault_4",      "vault_5",      "vault_6"    ]  },  "voters": [    "vault_2",    "vault_3",    "vault_4",    "vault_5",    "vault_6"  ]}

This displays the cluster health, and its failure tolerance. The current leader node is vault_2. The Failure Tolerance is 2. This means you can lose up to 2 nodes and still keep quorum. Note that the healthy parameter value is true for all nodes in the cluster.

Refer to the deployment table for the quorum size and failure tolerance for various cluster sizes.

Stop one of the nodes

Set the cluster.sh file to executable.
```
$ chmod +x cluster.sh
```

Stop vault_6.

$ ./cluster.sh stop vault_6Found 1 Vault service(s) matching that name[vault_6] stopping

Optional: You can verify that vault_6 is not running.

$ ps | grep vault41873 ttys009    0:34.57 vault server -log-level=trace -config <path>/config-vault_1.hcl41919 ttys009   11:07.38 vault server -log-level=trace -config <path>/config-vault_2.hcl41966 ttys009    1:50.94 vault server -log-level=trace -config <path>/config-vault_3.hcl41982 ttys009    1:52.26 vault server -log-level=trace -config <path>/config-vault_4.hcl41998 ttys009    1:50.86 vault server -log-level=trace -config <path>/config-vault_5.hcl45834 ttys009    0:00.01 grep --color=auto --exclude-dir=.bzr --exclude-dir=CVS --exclude-dir=.git --exclude-dir=.hg --exclude-dir=.svn --exclude-dir=.idea --exclude-dir=.tox vault

Check the cluster health.

$ vault operator raft autopilot state

Notice that the Healthy state of the cluster is false, and the Failure Tolerance is now 1.

Healthy:                      falseFailure Tolerance:            1Leader:                       vault_2Voters:   vault_2   vault_3   vault_4   vault_5   vault_6...snip...

Now, the Healthy parameter value is false on the cluster, and the Failure Tolerance is 1. The Healthy state of the vault_6 is false, so you know it has failed.

...snip...   vault_6      Name:            vault_6      Address:         127.0.0.1:8601      Status:          voter      Node Status:     alive      Healthy:         false      Last Contact:    55.577082309s      Last Term:       3      Last Index:      154

Although vault_6 is no longer running, it's still a cluster member at this point.

Autopilot configuration

Check the autopilot settings to learn the default behavior.

Parameter	Description
Cleanup Dead Servers (`bool`)	Specifies automatic removal of dead server nodes periodically.
Last Contact Threshold (`string`)	Limit the amount of time a server can go without leader contact before it's considered unhealthy.
Dead Server Last Contact Threshold (`string`)	Limit the amount of time a server can go without leader contact before it's considered failed. This should be typically a high duration, such as a day, else it being too low may result in removal of nodes that aren't actually dead.
Server Stabilization Time	Minimum amount of time a server must be stable in the 'healthy' state before it's added to the cluster.
Min Quorum (`int`)	Minimum number of servers allowed in a cluster before autopilot can prune dead servers.
Max Trailing Logs (`int`)	Maximum number of log entries in the Raft log that a server can be behind its leader before it's considered unhealthy.
Disable Upgrade Migration (`bool`)	Specifies whether to perform automatic upgrade migration

Check the current autopilot configuration.

$ vault operator raft autopilot get-configKey                                   Value---                                   -----Cleanup Dead Servers                  falseLast Contact Threshold                10sDead Server Last Contact Threshold    24h0m0sServer Stabilization Time             10sMin Quorum                            0Max Trailing Logs                     1000Disable Upgrade Migration             false

The Cleanup Dead Servers parameter is false.

Update the autopilot configuration to enable the dead server cleanup. For demonstration in this tutorial, set Dead Server Last Contact Threshold to 1 minute, and the Server Stabilization Time to 30 seconds. Note that Dead Server Last Contact Threshold especially should be set to a much larger value in production, and should generally be in the time-scale of days or hours, not minutes. The consequences of this being too low could have the drastic consequences of removing a node that wasn't actually dead.
Warning
These example values are for use just in this tutorial. These values should not be used in a production environment.
```
$ vault operator raft autopilot set-config \    -dead-server-last-contact-threshold=1m \    -server-stabilization-time=30 \    -cleanup-dead-servers=true \    -min-quorum=3
```

Verify the updated configuration.

$ vault operator raft autopilot get-configKey                                   Value---                                   -----Cleanup Dead Servers                  trueLast Contact Threshold                10sDead Server Last Contact Threshold    1m0sServer Stabilization Time             30sMin Quorum                            3Max Trailing Logs                     1000Disable Upgrade Migration             false

Check the cluster health.

$ vault operator raft autopilot stateHealthy:                      trueFailure Tolerance:            1Leader:                       vault_2Voters:   vault_2   vault_3   vault_4   vault_5Servers:   ...snip...

The cluster's Healthy parameter value is back to true. Notice that vault_6 is no longer listed. The Voters parameter lists vault_2 through vault_5.

List cluster peers to learn about the cluster's health, and leader status.

$ vault operator raft list-peersNode       Address           State       Voter----       -------           -----       -----vault_2    127.0.0.1:8201    leader      truevault_3    127.0.0.1:8301    follower    truevault_4    127.0.0.1:8401    follower    truevault_5    127.0.0.1:8501    follower    true

Get the root token of vault_2.
```
$ cat root_token-vault_2
```

Use the root token to get the current autopilot configuration.

$ curl --silent --header "X-Vault-Token: <root_token-vault_2>" \    http://127.0.0.1:8200/v1/sys/storage/raft/autopilot/configuration | jq .data

Output:

{  "cleanup_dead_servers": false,  "dead_server_last_contact_threshold": "24h0m0s",  "last_contact_threshold": "10s",  "max_trailing_logs": 1000,  "min_quorum": 0,  "server_stabilization_time": "10s"}

The cleanup_dead_servers parameter is false.

Update the autopilot configuration to enable the dead server cleanup. For demonstration, set the Dead Server Last Contact Threshold to 1 minute, and the Server Stabilization Time to 30 seconds. These values should not be used in a production environment.

First, create the request payload.

$ tee payload.json <<EOF{  "cleanup_dead_servers": true,  "dead_server_last_contact_threshold":"1m",  "min_quorum":"3",  "server_stabilization_time": "30"}EOF

Update the autopilot configuration.

$ curl --header "X-Vault-Token: <root_token-vault_2>" \    --request POST \    --data @payload.json \    http://127.0.0.1:8200/v1/sys/storage/raft/autopilot/configuration

Verify the configuration.

$ curl --silent --header "X-Vault-Token: <root_token-vault_2>" \    http://127.0.0.1:8200/v1/sys/storage/raft/autopilot/configuration | jq .data

Output:

{  "cleanup_dead_servers": true,  "dead_server_last_contact_threshold": "1m0s",  "disable_upgrade_migration": false,  "last_contact_threshold": "10s",  "max_trailing_logs": 1000,  "min_quorum": 3,  "server_stabilization_time": "30s"}

Check the cluster health.

$ curl --header "X-Vault-Token: <root_token-vault_2>" \    http://127.0.0.1:8200/v1/sys/storage/raft/autopilot/state | jq .data

Output:

{  "failure_tolerance": 1,  "healthy": true,  "leader": "vault_2",  "non_voters": null,  "servers": {     ...snip...  },  "voters": [    "vault_2",    "vault_3",    "vault_4",    "vault_5"  ]}

The cluster's healthy parameter value is back to true. Notice that vault_6 is no longer listed. The voters parameter lists vault_2 through vault_5.

Add a new node to the cluster

Explore how the autopilot configuration settings influence the cluster when you add a new node.

Add a new node (vault_7) to the cluster.

$ ./cluster.sh setup vault_7[vault_7] starting Vault server @ http://127.0.0.1:8700Using [vault_1] root token (s.wsEIMfqTipb0mZT051TNbcYJ) to retrieve transit key for auto-unseal

List the cluster members.

$ vault operator raft list-peersNode       Address           State       Voter----       -------           -----       -----vault_2    127.0.0.1:8201    leader      truevault_3    127.0.0.1:8301    follower    truevault_4    127.0.0.1:8401    follower    truevault_5    127.0.0.1:8501    follower    truevault_7    127.0.0.1:8701    follower    false

Notice that the vault_7 server is a non-voter. (The Voter parameter value is false.)

Check the cluster health.

$ vault operator raft autopilot stateHealthy:                      trueFailure Tolerance:            1Leader:                       vault_2Voters:   vault_2   vault_3   vault_4   vault_5Servers:   ...snip...   vault_7      Name:            vault_7      Address:         127.0.0.1:8701      Status:          non-voter      Node Status:     alive      Healthy:         true      Last Contact:    2.580581282s      Last Term:       3      Last Index:      78

The vault_7 server joins the cluster as a non-voter until the Server Stabilization Time of 30 seconds elapses.

Wait for 30 seconds and check the cluster peers.

$ vault operator raft list-peersNode       Address           State       Voter----       -------           -----       -----vault_2    127.0.0.1:8201    leader      truevault_3    127.0.0.1:8301    follower    truevault_4    127.0.0.1:8401    follower    truevault_5    127.0.0.1:8501    follower    truevault_7    127.0.0.1:8701    follower    true

Now, the vault_7 server should be a voter. This is a part of the server stabilization mechanism of the autopilot.

Vault Enterprise

The explicit non-voter nodes behave the same way as before and remain non-voters as designed. If you enable dead server cleanup, it prunes failed non-voters.

Configure the state change interval

By default, the autopilot picks up any state change an interval of 10 seconds. To change the default, set the autopilot_reconcile_interval parameter inside the storage stanza in the server configuration file.

Example: The following server configuration file sets the autopilot to picks up state change an interval of 15 seconds.

storage "raft" {  path = "/path/to/raft/data"  node_id = "raft_node_1"  # overwrite the default interval  autopilot_reconcile_interval = "15s"}listener "tcp" {  address     = "127.0.0.1:8200"  tls_disable = true}cluster_addr = "http://127.0.0.1:8201"

Clean up

The cluster.sh script provides a clean operation that removes all services, configuration, and modifications to your local system.

Clean up your local workstation.

$ ./cluster.sh cleanFound 1 Vault service(s) matching that name[vault_1] stopping...snip...Removing log file /learn-vault-raft/raft-autopilot/local/vault_5.logRemoving log file /learn-vault-raft/raft-autopilot/local/vault_6.logClean complete

Help and reference

Vault Enterprise Replication

If you are running Vault Enterprise with replication enabled, read the Replication section in the Autopilot documentation for additional information.

The following tutorials walk through the Enterprise Replication setup:

Vault HA cluster with integrated storage

Fault tolerance with redundancy zones